You might be thinking that how to perform Linksys extender firmware update process, right? Don’t worry! The process is not a daunting task. Here, in this article, we have mentioned the instructions through which performing extender firmware update process will be a piece of cake for you. So, stick to this 5-minute read.
How to Update Linksys Extender Firmware?
Turn On the Linksys Extender
Initiate the Linksys firmware update process by plugging it into a power outlet. Wait! Its just not enough! After plugging in your Linksys extender, don’t forget to press the power button.
Connect the Extender to Router
Connect one end of the Ethernet cable to your main router and another to the Linksys WiFi range extender.
The Ethernet cable you are using must not have any deep cuts. Making use of a damaged cable may harm the extender and might not allow you to to update the firmware of your Linksys device successfully.
Open an Internet Browser
Switch on your computer or laptop. Is the software version on the device up-to-date? If yes, then its fine. Now, open a web browser of your choice on the up-to-date device. No matter whichever web browser you are using, just confirm that it is not of on an outdated version. Also, its history and close/ unpin all the unwanted tabs. For the time being, just open only one tab for updating Linksys extender firmware.
Visit Linksys WiFi Setup Page
And for that, you need to enter extender.linksys.com in the address bar of the web browser. Otherwise, you will get extender.linksys.com not working isue.
Perform Linksys Extender Login
Once you have accessed the Linksys WiFi setup portal, you need to put the default admin login details (unless changed) of your Linksys extender to use. Enter the extender’s username and password into the required fields very carefully and After that, click on the Log In button. Thus, the Linksys WiFi extender setup page will appear in front of you.
Note: make sure to have the correct Linksys extender password and username with you. If you don’t have them, then you will not be able to reach the Linksys extender’s firmware update page.
Just in case, the default login details aren’t working for you or you have lost or forgot the personalized extender’s username and password, then you can easily get them back by performing Linksys extender reset process.
Update Extender Firmware
Locate the Settings menu on the Linksys WiFi setup page. As soon as you find it, select it and click on the Firmware Update button. Once you hit the firmware update button, the process will start on the same page. So, have patience and do not interrupt the Linksys extender firmware update process by going online, turning off the extender, closing the current page, etc.
Although performing Linksys extender firmware update is not rocket science, but, if you face issues during the process, then simply ensure that your existing router makes a perfect pair with your Linksys extender. You might not know, but your router plays a very important role in performing and completing the Linksys extender setup process. So, if your router is extender-compatible, then its fine. Else, you need to replace it as soon as possible. If you have planned to replace your existing router, then let us tell you – nothing can beat Linksys router.
But, as like Linksys extender, you need to configure the Linksys router as well. Just visit its official site using default Linksys router login password for complete configuration instructions. The Bottom Line Performing Linksys extender firmware update process is important if you want to enhance the performance of your device to greater extent. We expect that this article proved helpful to you.